Emilie Bier Do it Your Self

Mod hodgepodge memory of the Dead for a children' space - Mod-hodgepodge rock

Turn a regular wooden bin in the Mod-hodgepodge-store! Use acrylic color and your favorite paper to customize – then 8217 personalize with a child&#; s name.

It’s no secret that I love bags. My next point, after you Mod hodgepodge Command Central (possibly Mod podge world HQ?) have a work room, and in the craft room, many of the bag is.
The only difference is that I will give you a different tote, such as this Mod conglomeration of storage of the dead, but my name, instead of the name of one of my friend’s children. Here are my instructions.
Mod smorgasbord storage Tote
Collect These Supplies

FolkArt acrylic paint – coffee beans, Fresh Foliage, Orange
Mod smorgasbord of Hard Coat
DCWV chipboard Box-Animal Crackers
DCWV 12" x 12" Scrapbook paper, Animal Cracker sheets coordination
Band – Orange/Yellow and Red/White
Woodline Works wood storage bin
1" Flat brush
craft glue
Craft knife and Mat
painters tape
pencil
ruler


I cut my paper first. With the pencil, trace one side am, on every piece of paper. Measure 1" inside and mark with the ruler. To cut, use the cutter knife to the Form. Leave 1" on each side of the color allows you to show the edges of the paper.
Choose two of the pieces you just cut on the sides with the handles.. Use a piece of painter's tape to position the paper where you cut it down. Trace the handle on each piece of paper and cut it out. Set aside the papers for all four sides.
With the brush, first coat the entire inner side and upper edges of the container with Orange. Let dry.
Use painter's tape to tape off two opposite sides of the bin. Paint it bean the sides with the handles of coffee. Let it dry, and paint the other two sides Fresh Foliage. Allow project to dry completely.
This is the fun part! Under each page, in turn, decoupage the papers down. Remember, the middle of the handle you cut over the hole. Let dry.
Go back and Mod conglomeration of the entire bin, inside and outside. Use at least two layers and let it dry completely.
time to accent and add character. With the craft glue to attach the orange/yellow ribbon about 1/4″ from top to bottom, all the way. Seam on an edge or a side you do not see.
Add the chipboard shapes with the craft glue on random. Check out what I have on the photo. I also tie a different colour ribbon (red/white) to a clamping plate in the shape of the handle. It is not beautiful?
the whole project to dry for 24 hours before you use it.

Patchwork DIY photo Mat out of Scrapbook paper Mod conglomeration of rocks
Easy Washer necklace with Dimensional Magic
Unique Wallpaper-chest of drawers with Mod-hodgepodge